Friday, May 1, 2009

Erie 2001 Valve Leaking to Drain or Brine Tank - Cam Sync problem

** Customer shares how to Sync the Cam on an Erie 2001 Rotary Valve

I began by removing the cover of the front of the control module. A thorough examination revealed the two micro switches I mentioned in earlier correspondence.

See picture 001 notice the red rectangle in the lower left. The micro switches are activated by cylinder shaped device by it’s rotation. See picture 002 Notice the little rusty screw(green arrow). That screw allows you to turn the cylinder with out turning the worm gear or the valve body. You see in picture 003 exactly how this occurs. If you depress the micro switch the motor will turn.

I simply used the plug to stop and start the motor until the valve body was in the closed position and then loosened the screw and rotated the cylinder until the cylinder until the recess was at the button on the micro switch. This has seemed to put everything where it needs to be for proper operation.

No comments: