Water Flowing to Salt Tank after replacing Brine Valve Piston Assembly Fleck part 60032

Hi , I just received a new repair kit # 56PSKIT and have installed it, however it now puts too much water into the brine tank, so much so the float in the brine tank rises and shuts it off. What have I done wrong? I thought I followed the instructions to a T. Please advise

** Perhaps when you replaced the Brine Valve Piston Assembly ( 60032 ) you accidentally pulled out the oring ( 13302 ) that sits in the bottom of the hole which the valve is installed in.

Or at least the oring came out 1/2 way, and you have jammed the Brine Valve onto the oring and it is not sitting flat.

** Remove the Brine valve and look in the hole for this oring. If you do not see it, look on the floor around the unit. If you have lost it, you can use the one that is on your old Brine Valve, as there is another 13302 oring on the Brine Valve ( it is on the white plastic portion of the assembly ). And of course we sell new ones at Softenerparts.com.